Brass Hammer ,Non Sparking Plier And Non Sparking Hammering Wrench_Cangzhou Dean Safety & Special Type Tools Producing Co.,Ltd

We independently research and develop various molds for forgings, stampings and castings. The molds are mainly produced by the 3-axis CNC machining center and CNC machine tools. The machining center is producing the molds for double-ended ring spanners.
The dust removal system ensures that the dust emission meets environmental protection regulations. The 200kg electric furnace melts the copper. Copper workblank after demolding
The workpiece is ready for water cooling after high temperature casting. The copper workblank after high-temperature processing at 880 degrees. he air hammer carries out the forging and stamping.
45 steel workblanks are continuously being forged. The forging and pressing workshop is equipped with more than 20 sets of forging and pressing equipment. Before forging, the workpieces should go through a tempering treatment for 30 minutes in the electric furnace.
The 1200T hydraulic forging and pressing machine is in operation. The machining workshop occupies an area of over 1600 square meters. The face grinding machine is imported from Taiwan.
The double open end spanner is being polished. The universal horizontal milling machine is machining a dual purpose tool for aluminum bronze. The universal horizontal milling machine is machining a dual purpose tool for aluminum bronze.
The slotting machine is machining a 55 aluminum bronze ring slogging spanner. The slotting machine is machining a 55 aluminum bronze ring slogging spanner. The slotting machine is machining a 55 aluminum bronze ring slogging spanner.
Mr. Xu is an experienced worker with more than 10 years of experience in horizontal lathe machining. Every workpiece should pass through more than 5 inspections. The dedicated milling machine is processing the 7-shaped end face of adjustable wrench
The dedicated milling machine is processing the 7-shaped end face of adjustable wrench The dedicated broaching machine is producing double ring spanner The assembly of the spanners is carried out on the workbench
It takes 2 minutes to assemble a spanner, the precision is 0.2-0.4mm. In the polishing workshop, the technicians are divided into groups to polish the products. The fine polishing is accomplished by the abrasive belt.
The semi-finished products warehouse stores a large number of non-sparking copper parts. The semi-finished products warehouse stores a large number of non-sparking copper parts. The warehouseman, Miss Li, is carefully checking the finished products.
DEANTOOLS